Taut Wire Weight 360kg


SMT Weight 360kg


SMT Taut Wire 360kg weights are used to provide a reference point on the seabed from which all subsequent positional data is referenced from.

SMT Taut Wire Weight 460kg


SMT Weight 460kg


SMT Taut Wire 460kg weights are used to provide a reference point on the seabed from which all subsequent positional data is referenced from.

SMT Taut Wire Wire Rope 4.9mm 500m

SMT Wire Rope - 4.9mm  500m


SMT Taut Wire 4.9mm diameter wire rope is a high performance, galvanised wire rope.

SMT Taut Wire Wire Rope 4.9mm 700m


SMT Wire Rope - 4.9mm  700m


SMT Taut Wire 4.9mm diameter wire rope is a high performance, galvanised wire rope.

SMT Taut Wire Wire Rope 4.9mm 700m


SMT Wire Rope - 5.0mm  700m


SMT Taut Wire 5.0mm diameter wire rope is a high performance, galvanised wire rope.

SMT Taut Wire Termination Kit


SMT Termination Kit


SMT Taut Wire termination kits includes all items required to connect a weight onto the end of the wire rope. Kit includes: 1x Grease Spring, 1x Target Plate, 1x Target Plate Spring, 2x Eureka Grips, 1x Thimble, 1x Swivel and 1x Safety Shackle.

SMT Taut Wire Target Plate


SMT Target Plate


SMT Taut Wire target plates are used to stop the depressor weight from being lifted into the gimbal head during operation. Manufactured from stainless steel.

SMT Swivel


SMT Taut Wire Swivels are mounted between the weight and wire rope to limit damage being cause to the wire rope during lifting and lowering operations. 750kg SWL.

SMT Safety Shackle


SMT Taut Wire safety shackles are used to connect the weight onto the wire rope. 1000kg SWL. Manufactured from stainless steel.

SMT Thimble


SMT Taut Wire thimbles are used to support the end of the wire rope when it is formed into a loop for attaching the weight. Manufactured from stainless steel.


SMT Eureka Grip


SMT Taut Wire eureka grips are used to secure a loop at the end of the wire rope to allow the weight to be attached. Two should be used per termination on SMT systems.


SMT Target Plate Spring [ SMT Specific ]


SMT Taut Wire target plate springs are used in conjunction with a target plate to allow time for the weight to stop safety once detected. Manufactured from stainless steel.


Kits available for other Taut Wire systems.

Call us on +44 (0) 1651 842450